Pressing off/in radial seal at side of rear axle housing - AR35.31-P-0540-05F

Pressing off/in radial seal at side of rear axle housing; Universal hypoid gear oils (SAE 85 W-90); Radial seal on side of rear axle housing and connecting flange modified 

As of 1.4.98 on models 202.085 with transmission 722 and rear axle differential diameter 185, 202.134/194 except CODE (450) Taxi version, 210.007 with rear axle differential diameter 185 

Fig 1: Identifying Drift (126 589 00 15 00)

Fig 2: Identifying Drift (211 589 00 15 00)

Pushing off 

1. Press radial sealing ring (32) out of housing using a suitable screwdriver.
   Fig 3: Pressing Radial Sealing Ring Out Of Rear Axle Housing

   

Pressing in 

2. Coat sealing lip of new radial seal (32) with universal hypoid gear oil.
3. Press in radial seal (32) using a drift (049b).

   Rear axle differential dia. 185 mm: 126 589 00 15 00

   Rear axle differential dia. 187 mm: 211 589 00 15 00

   Fig 4: Pressing In Radial Seal Using Drift