Measure and note total friction torque of drive pinion - AR35.31-P-0530-04P

Fig 1: Identifying Torque Meter (001 589 49 21 00)

Fig 2: Identifying Connection Piece (100 589 02 59 00)

Fig 3: Identifying Socket Wrench Bit (126 589 02 09 00)

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1013-06A	Wrench bit 41 mm hexagon 3/4 inch four-point

Special tool assignment

Rear axle center assembly ø 185 mm, 198 ø mm, 210 mm ø in rear axle center assembly 210E

Torque meter 001 589 49 21 00

Connection piece 100 589 02 59 00

Rear axle center assembly ø 185 mm

Wrench socket 126 589 02 09 00

Rear axle center assembly 198 ø, Rear axle center assembly dia. 210 mm in rear axle center assembly 210E

Wrench socket WH58.30-Z-1013-06A

Measure and note total friction torque at twelve-point collar nut using socket wrench bit (040a), connection piece (040c) and torque meter (040b).
The friction value before slacking and after tightening the twelve-point collar nut must be the same.

Fig 4: Measuring And Noting Total Friction Torque Of Drive Pinion