Check rear axle differential variant - AR35.31-P-0525P

MODEL 203, 209, 211, 221 

Fig 1: Identifying Rear Axle Differential Variant (Breather In End Cover Of Rear Axle Differential)

Fig 2: Identifying Rear Axle Differential Variant (Breather In Housing Of Rear Axle Differential)

	Checking
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle	Model 221	AR00.60-P-1000SX
		Model 211	AR00.60-P-1000T
		Model 203/ 209	AR00.60-P-1000P
2	Determine position of breather (55a) on rear axle differential (50)	On rear axle differentials with breathers in the end cover (50d) the friction torque must be adjusted after dismantling the joint flange (41).