Install new right outer radial sealing ring Universal hypoid gear oils (SAE 85 W-90) - AR33.30-P-0540-01P

MODIFICATION NOTES

1.8.03

Model 203 special tool replaces

Step 1

Fig 1: Identifying Counter-Support (000 589 33 33 00)

Fig 2: Identifying Internal Extractor (203 589 03 33 00)

Fig 3: Identifying Drift (210 589 01 15 00)

Remove 

1. Pull off radial sealing ring (32) using counter-support (036) and internal extractor (037).
   Fig 4: Identifying Seal Ring, Counter-Support And Internal Exactor

   

Install 

2. Coat sealing lip of new radial sealing ring with universal hypoid gear oil.
3. Press radial sealing ring into the front axle gear housing using a drift (032) and suitable extension.
   Fig 5: Identifying Drift