Fitting special wheels - AZ40.10-P-0001-08A

1. Screw dowel bolt (vehicle tool kit) into the topmost threaded bore in the wheel hub.
2. Fit AMG light-alloy wheel and press onto wheel hub.
3. Screw in wheel bolts and tighten firmly.

   The wheel bolts must be dry and free of grease. Make sure that the wheels are not distorted by tightening the wheel bolts too much on one side (tighten wheel bolts in a cross pattern in several passes).

4. Unscrew dowel bolt and replace with a wheel bolt.
5. Lower the vehicle.
6. Tighten wheel bolts evenly in a cross pattern to a torque of 110 Nm.

AMG light-alloy wheels must be retightened after a distance of between 100 and 500 km.