Noises at front seats - AF91.10-P-9000PG

MODEL 203.0## #A up to 038987 

MODEL 203.0## #F up to 021690 

Damage code	Cause	Remedy
	Cause 1:	Remedy 1
	Friction noises in bottom-most position of inclination adjustment on front seat Side material insert (only with leather cover) rubs against seat adjustment frame (Fig 1, arrows).	1 Remove front seat cushion.	AR91.10-P-1070P
		2 Glue textile adhesive tape to seat adjustment frame on left and right (Fig 2, arrows).
		3 Install front seat cushion.	AR91.10-P-1070P
	Cause 2:	Remedy 2:
	Friction noise at head restraint on leather cover on front seat Leather cover rubs against housing with correspondingly adjusted head restraint inclination adjustment	1 Create "clearance" for leather cover (wrinkle formation) to plastic housing in corner area with plastic wedge (Fig 3, arrows).
	Cause 3:	Remedy 3:
	Noises at head restraint guide on front seat. Head restraint guide has play in mounting hole in upper backrest frame (Fig 4, arrows).	1 Remove front seat	AR91.10-P-1000P
		2 Remove lining from backrest frame Refer to↓
		Remove front seat backrest cover	AR91.18-P-1820P
		3 Reduce size of hole for head restraint guide by clipping sheet metal flange (Fig 5, arrow) with pliers or punch
		4 Install in the reverse order

Fig 1: Locating Seat Adjustment Frame

Fig 2: Locating Textile Adhesive Tape Glued To Seat Adjustment Frame

Fig 3: Locating Leather Cover

Fig 4: Locating Mounting Hole

Fig 5: Locating Head Restraint Guide Hole