Fault code description - ME-SFI - crankshaft position sensor - AD07.61-P-4000-13A

1	Fault code	P0335
2	Fault storage	after the end of the test period and faults
	Activation of malfunction indicator lamp for engine diagnosis (EURO3/4) or CHECK ENGINE (MIL)	after two successive driving cycles with faults
3	Frequency of the test	continuous
4	Checked signal or status	Crankshaft position sensor signal (counting the teeth on the flywheel)
5	Fault setting conditions
	Lower limit	(60 - 2 teeth) - 1 tooth
	Upper limit	(60 - 2 teeth) + 1 tooth
	Test duration	approx. 5 s