CAN fault detection ME - fault code description - AD07.61-P-4000-32AA
| 1 | Fault code ( |
P20CC CAN message from ESP control unit (N47-5) missing or faulty (-) |
| 2 | Fault storage | After expiry of test duration and fault |
| Activation of the engine diagnosis indicator lamp (EURO3/4) or CHECK ENGINE (MIL) malfunction indicator lamp |
No activation | |
| 3 | Checking frequency | Continuous |
| 4 | Checked signal or status | Information exchange between the engine control unit and EPS control unit is monitored. |
| Approx. 1 second | ||
| Checking duration |