Tire pressure loss warning (RDW) Mercedes-Benz Driver Information Service - GF40.15-P-0002-03P

Models 203.0/2 

MODEL 203.7 

The tire pressure loss warning (RDW) can be displayed in the multifunction display (A1p13) in the instrument cluster (A1).

These can be shown as follows:

• Warning messages
• Information displays

Fig. 1 

System information 

The messages in the multifunction display (A1p13) can be:

• shown against a colored background
• acknowledgeable
• not acknowledgeable
  Fig 3: Identifying Display Of System Information

  

Re figure 1:

The tire pressure loss warning (RDW) is first available as of "circuit 15 ON".

Figure 2 

Selection screen 

Re picture 2:

This display appears when a reactivation is performed.

Fig. 3 

Selection screen 

Re picture 3:

Once the tires have been checked, the confirmation for the tire pressure loss warning (RDW) is given in this display.

If this confirmation dies not take place, the tire pressure loss warning is not active.

Figure 4 

Confirmation screen 

Re picture 4:

This display appears to confirm that the tire pressure loss warning is active.

Fig. 5 

Warning message 

Re picture 5:

Warning message while driving

The tire pressure loss warning has established that the rolling circumferences of the wheels have changed relative to each other. It is necessary to check the wheels.

The message can be acknowledged.

Fig. 6 

System reminder 

Re picture 6:

Since the last red warning message the tire pressure loss warning has not yet been restarted.

Figure 7 

System message 

Re picture 7:

In this display a driver's acknowledgment is no longer possible.

Activation is only possible in the workshop via STAR DIAGNOSIS.