Measure expanded dimension of rear axle housing - AR35.31-P-0550-24C
TEST VALUES FOR REAR AXLE HOUSING EXPANSION
| Number | Designation | Models 124.003/004/007/019/ 022/023/026/027/030/040/ 042/043/050/060/062/079/ 082/083/090, Models 124.104/107 as of 01.05.94 Models 124.127/128/129/130/ 131/133, Model 124.186 as of 01.03.94, except (code 450) Models 124.188/190/191/193/ 226/230/290/330/333/393 | Model 124.020/021/080/ 081/120/125/126/180/ 185/186, with (code 450) as of 01.11.88 | |
|---|---|---|---|---|
| BE35.31-P-1003-04C | Setting for rear axle housing expansion (spread dimension) | mm | 0.11...0.17 | 0.11...0.17 |
TEST VALUES FOR REAR AXLE HOUSING EXPANSION
| Number | Designation | Model 129.060 | Model 170.444/ 445/447/ 449 | Model 201.018/023/024/ 122/126, with (code 450) as of 01.11.88 | |
|---|---|---|---|---|---|
| BE35.31-P-1003-04C | Setting for rear axle housing expansion (spread dimension) | mm | 0.11...0.17 | 0.11...0.17 | 0.11...0.17 |
TEST VALUES FOR REAR AXLE HOUSING EXPANSION
| Number | Designation | Model 201.028/ 029/035/036/ 128 | Model 202.018/078/ 120/121/122/ 125/182 with (code 450), Model 202.018/020/ 022/120/121/125 with (code 211) ASD | Model 202.020/022/023/ 024/025/026/028/029/ 080/081/082/083/086/ 087/088/089/ 128/188, Model 202.085 with automatic 5-speed transmission, Model 202.134/194 except code 450 | |
|---|---|---|---|---|---|
| BE35.31-P-1003-04C | Setting for rear axle housing expansion (spread dimension) | mm | 0.11...0.17 | 0.11...0.17 | 0.11...0.17 |
TEST VALUES FOR REAR AXLE HOUSING EXPANSION
| Number | Designation | Models 203.035/045/ 061/235/245/ 261/735/745/ 747, Model 203.004/204 except Code 450 | Model 208.335/344/ 345/347/348/ 435/444/445/ 447/448 | Models 209.316/342/ 343/361/375/ 376/442/461/ 475/476 | |
|---|---|---|---|---|---|
| BE35.31-P-1003-04C | Setting for rear axle housing expansion (spread dimension) | mm | 0.11...0.17 | 0.11...0.17 | 0.14...0.20 |
TEST VALUES FOR REAR AXLE HOUSING EXPANSION
| Number | Designation | Model 210.003/004 with code 450 Model 210.007 except code 450 | Model 210.010/020/ 035/037/048/ 061/062/210/ 235/237/248/ 261/262/610 | |
|---|---|---|---|---|
| BE35.31-P-1003-04C | Setting for rear axle housing expansion (spread dimension) | mm | 0.11...0.17 | 0.11...0.17 |
- Measure spread (expansion) of rear axle housing again using
contact arm (059)and dial indicator previously set to "0".
If the spread dimension is outside the specification, make a note of this value for the time being.