Remote control key, design - GF80.57-P-4101-01PP
0
The remote control key consists of an electronic and a mechanical key. The electronic component contains an FM radio transmitter, an infrared transmitter/receiver unit, a computer chip, the control buttons and a battery.
Lock button (1)
- Press once (global locking)
- Press once and hold down, while pointing at IR receiver unit (convenience closing)
Unlock button (2)
- Press once with "Selective" setting (driver's door and fuel filler flap are unlocked)
- Press twice with "Selective" setting (unlocks everything)
- Press once with "Global" setting (unlocks everything)
- Press once and hold down while pointing at IR receiver unit (convenience opening)
Release trunk lid button (3) model 203.0 only
- Press once, t > 500 ms (trunk open)
Battery check LED (4)
- Indicating the status of the battery by coming on momentarily when the remote control key is actuated.
- Confirmation of switchover of central locking from selective to global unlocking or vice versa by flashing twice (press buttons (1 and 2) simultaneously and hold down for t > 5 s).
Release (5)
- The mechanical key (7) can be removed by actuating the release (5).
Panic alarm button (6)
(with code (763) Radio remote control with panic switch)
- Alarm triggering by actuating once (t > 1 s).
- Alarm discontinuation by pressing again.