Convenience closing/opening with transmitter key function - GF80.45-P-2003PP
MODEL 203
Convenience opening/closing via infrared signal
Networking of components shown on model 203.0
Function requirements
- Circuits 15C, 15R and 15 off
- No overvoltage or undervoltage
- All doors closed and
- No other control module sending central opening/closing signals
- Unlock/Lock button on transmitter key (A8/1) pressed for longer than 1 s.
Function
The corresponding control modules receive the CAN messages for convenience opening/closing and actuate the required motors . The motors remain actuated for as long as the button on the transmitter key is pressed, though for no longer than 25 s.
The convenience opening/closing function for the power windows operates even if windows are not normalized .
The convenience opening/closing function is aborted if
- An obstruction is detected, or
- The request is no longer received via the CAN, or
- The function requirements listed above are no longer satisfied.
| Convenience feature (CF [KFB]) function | GF80.45-P-0003PP | ||
| Convenience closing of power windows function | GF72.29-P-3005PP | ||
| Driver front door control module location/task/design/function | GF72.29-P-4105PP | ||
| Rear door control module location/task/design/function | Model 203.0/203.2 | GF72.29-P-4102PP |