CD-player mode, function - GF82.60-P-2002B

MODELS 163, 168, 170, 203.0 /2 /7, 208, 209.3 /4, 210 with CODE (353) Audio 30 APS 

CD's can be played on the CD drive integrated into the radio and navigation unit (A2/56) or with the CD player with changer (in glove compartment) (A2/6). The audio data are transmitted over the Digital Data Bus (D2B). The CD disk drive is a double-speed standard CD disk drive, which is suitable both for playing back audio CDs and for reading and loading navigation data from navigation data CDs.

A special navigation CD must be inserted for navigation purposes.

The CD player integrated into the radio and navigation unit (A2/56) provides the following audio functions:

• Fast forward or reverse (music search) The music played is audible during fast forward or reverse.
• "Scan" function

  Each track on a CD is played for 8 s. After a complete run through, the scan function is automatically terminated.

• "Random" function

  All the tracks on a CD are played according to a random selection.

• "Repeat" function

  The current track is repeated.

• "Display" function

  The number and elapsed playing time for the current track, the total playing time and the number of tracks on the CD are displayed.

Each CD includes a permanently stored table of contents (TOC record). The table of contents (TOC entry) contains information such as the number of tracks on a CD and the CD's total playing time.

CD playback is automatically interrupted by the following functions (pause function):

• Traffic messages and public warning messages over the radio data system (RDS)
• Incoming telephone calls

CD playback is continued at the position at which the interruption took place. No part of the track is skipped during the pause function.

The CD playback volume is only reduced during navigation system voice output.