MB information, function - GF82.95-P-2010PM

MODELS 203.0 /2 /7 with CODE (359) TELE AID emergency call system, lowcost 

The vehicle has MB Telematics services:

• Roadside assistance call (Telediagnosis, Roadside Assistance)
• MB information call

MB information call 

The "MB Info" service allows the customer to get in contact with a DaimlerChrysler Information Center. This information service can provide users with updated information (such as on current traffic conditions and possible detours) or DC-specific additional information. This service is primarily an oral information service that is provided via the communications module in the emergency call system control unit (N123/4). The user activates this service by pressing the MB-Info and breakdown assistance button group (S93/6). If the service is authorized and no higher-priority service is active, the emergency call system control unit (N123/4) transmits an SMS to the service center.

The SMS contains the following data:

• Vehicle position
• Customer identification data
• Vehicle identification data

In addition to the SMS transmission, a voice connection is immediately established to the service center, and the user can discuss the matter with a customer service representative. If the service center is unable to establish a connection to the vehicle, the emergency call system control unit (N123/4) then attempts to establish a connection from the vehicle to the service center. The information service is a free service provided by Mercedes-Benz Customer Service.

Information on the following topics can be requested or provided:

• Current traffic conditions
• Technical questions
• Services
• Mercedes-Benz products
• Complaints
• Mercedes Card
• Leasing and financing plans

Status reports 

The status messages are output on the display of the following components:

• Radio (A2)
• COMAND operating, display and control unit (A40/3) with code (528) HIGH Class USA
• COMAND operating, display and control unit (A40/3) with code (530) APS USA (with navigation)
• Multifunction display (A1p13) in the instrument cluster (A1)

During an MB Information call, the following statuses are reported:

• MB Info, Call in progress
• MB Info, Call active
• MB Info, Call failed

	TELE AID control unit/task/design/function		GF82.95-P-4100PMU
	Telediagnosis push-button, location/task		GF82.95-P-4105PM
	Telephone antenna, location/task		GF82.62-P-4105PP