Automatic opening function - GF68.50-P-2004PC
MODEL 203.7 with CODE (413) panoramic sliding roof
Automatic function
Moving the roof system switch (N70s1) in the overhead control panel control module (N70) rearwards beyond the actuation point triggers the automatic "open sun blind" function.
The automatic function is aborted by moving the switch again in any direction.
"Automatic opening" is not possible when the sun blind is in the denormalized state.
| Denormalization function | GF68.50-P-2008PC | ||
| Panoramic sliding roof roller blind location/task/ design/function | GF68.50-P-4101PC | ||
| Overhead control panel control module location/ task/design/function | GF82.20-P-4101PP |