Multifunction steering wheel function - GF82.90-P-0001PY

MODELS 203.076/ 276

Fig 1: Multifunction Steering Wheel Function - Models 203.076/ 276

Fig 2: Identifying Steering Wheel Gear Shifter MINUS Steering Wheel Gear Shifter PLUS

The multifunction steering wheel serves to increase active driving safety in road traffic in combination with the instrument cluster (A1). The driver can concentrate on the traffic without distraction when controlling and operating various vehicle components. The multifunction steering wheel allows the driver to control the following checks:

Radio and navigation
Fault and warning messages
Interior lights
Trip computer
ASSYST
Distronic
Telematics/E-Call (USA)
Telephone
Steering wheel gear shift

Function prerequisites:

Circuit 15R ON

Only systems and functions with which the vehicle is equipped are displayed. If a system is not installed, it is skipped when the system selection button (S110s3) on the left multifunction steering wheel button group (S110) is pressed.

The system selected by the user is shown in the multifunction display (A1p13) of the instrument cluster (A1). In addition, the fanfare horns (H2) can be actuated by means of the impact plate of the multifunction steering wheel.

Only the trip computer features a load mode function. If changing to this system, the submenu that was selected last is displayed.

Left multifunction steering wheel button group (S110)

In system selection button (S110s3) and Scroll forward and backward buttons (S110s1) are included in the left multifunction steering wheel button group (S110).

Each of the systems can be called with the system selection button (S110s3). It is possible to "scroll" forward and backward in the systems.

Within a system, you can scroll forwards and backwards (S110s1) to view additional submenus.

Right multifunction steering wheel button group (S111)

The right multifunction steering wheel button group (S111) contains the accept/terminate phone call button (S111s3), and the + and - button, setting of specific functions and volume control (S111s1).

A telephone call can be accepted or terminated with the accept/terminate phone call button (S111s3).

The volume for the system currently active can be adjusted with the + and -button, setting of specific functions and volume control (S111s1). Furthermore, it is possible for instance to extend or shorten the OFF delay time for exterior lights in the system settings.

Steering wheel gear shifter MINUS (S110/1) and steering wheel gear shifter PLUS (S111/1)

For program selection "M" (manual program) at the transmission mode switch (S16/5) the individual gears of the transmission can be shifted directly via steering wheel gear shifter MINUS (S110/1) or steering wheel gear shifter PLUS (S111/1).

For program selection "S" (sports program) or "C" (comfort program) at the transmission mode switch (S16/5) the following functions can be actuated via steering wheel gear shifter MINUS (S110/1) or steering wheel gear shifter PLUS (S111/1):

Adjusting the shifting range, to which the transmission shifts up.
Shifting into the gear from which the vehicle can be favorably accelerated or decelerated.

	Multifunction steering wheel networking of components		GF82.90-P-0001-01PY
	Scanning of switch positions, function		GF82.90-P-3001PY