Electric roller blind panoramic sliding roof function - GF68.50-P-0002PC

MODEL 203.7 with CODE (413) panoramic sliding roof 

Networking of components 

The panoramic sliding roof comprises a movable front glass panel and a stationary rear glass panel.

Additional sun protection is provided by two electrically powered sun blinds installed in the center bar of the roof. These cover the interior of the front movable glass panel and the rear stationary glass panel.

Function requirements 

• Circuit 15R ON or
• Circuit 15 ON

Function 

The sun blind drive unit (M24)  is operated using the sliding/tilting roof switch (N70s1)  .

The sliding/tilting roof switch (N70s1)  can be used to deploy the following functions:

• Manually close/open sun blind
• Automatically open sun blind

The convenience feature  function with the sub-functions convenience closing  and convenience opening  closes/opens the sun blind by means of the "Lock"/"Unlock" buttons on the transmitter key (A8/1)  .

	Convenience opening function		GF68.50-P-2000PC
	Convenience closing function		GF68.50-P-2001PC
	Close function		GF68.50-P-2002PC
	Open function		GF68.50-P-2003PC
	Automatic opening function		GF68.50-P-2004PC
	Lock-up recognition function		GF68.50-P-2005PC
	Position measurement function		GF68.50-P-2006PC
	Normalization function		GF68.50-P-2007PC
	Denormalization function		GF68.50-P-2008PC