LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2007 >> C230 Automatic >> Repair and Diagnosis >> Collision >> General Collision Information >> Body Panels -- Testing & Repair -- 203 Chassis - 1 Of 2 >> Testing & Repair >> Prepare inner rear wheelhouse for installation - AR63.10-P-0670-03P

Prepare inner rear wheelhouse for installation - AR63.10-P-0670-03P

COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1001-02A Hole punching pliers, dia. 6 mm.
WH58.30-Z-1001-03A Round wire brush, braided, dia. 70 mm
WORKSHOP EQUIPMENT

WE58.40-Z-1001-03A Drill (electric/pneumatic)
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1001-07A Zinc dust paint suitable for spot welding A 000 986 34 42
  1. Punch holes with 6 mm dia. bit in inner wheelhouse.
    Fig 1: Identifying Inner Rear Wheelhousing Holes In Inner Wheelhouse
    G04738618
    Fig 2: Identifying Inner Rear Wheelhousing Grinding Area
    G04738619
  2. Then grind connection surfaces to bare metal in checked areas. Sand spot welding flanges to bare metal on both sides Coat insides of spot welding flanges with zinc dust paint.
scientia non olet · About LEMON Manuals