Removing and installing inside rearview mirror - AR68.40-P-0001P

MODEL 203 

Illustrated on model 203.0 

Fig 1: Identifying Inside Rearview Mirror Remove/Install Components

	Removing, installing
1	Unclip overhead control panel control module (N70)
2	Pull inside rearview mirror (1) down at one side	The inside rearview mirror is held by spring tension
3	Disconnect connector from overhead control panel control module (N70)	With code (231a) garage door opener With CODE (249b) automatically dimming inside rearview mirror and outside rearview mirror (driver's side) With code (813b) voice control system (VCS)
4	Remove inside rearview mirror (1)	Installation:  Press spring bolt (2) together with pliers (arrow) and allow retainer to catch (3).
5	Install in the reverse order