Remove/install paneling on A-pillar - AR68.30-P-4050P

MODEL 203 

Shown on model 203.0 

Fig 1: Identifying Paneling On A-Pillar Remove/Install Components

	Remove/install
	Note on function reliability of windowbag		AH91.60-P-0693-01A
1	Remove edge protection (1) in area of A-pillar paneling
2	Press off A-pillar paneling (2)	Move assembly wedge directly to each clip (arrows) and press off.
		Mounting wedge	Figure
3	Remove A-pillar paneling (2) out of instrument panel guide upward
4	Install in the reverse order

Fig 2: Identifying Wedge Tool (110 589 03 59 00)