| 1 |
Unclip trunk floor paneling (1) and take out |
 Installation:
Lead anchoring lug (8) through the trunk floor paneling (1). |
|
| 2.1 |
Unscrew bolt (10) |
Model 203.7 with code (854) MB portable CTEL |
|
| 3 |
Unscrew bolts (9) on both sides |
 |
*BA68.50-P-1002-03A |
| 4 |
Take out anchoring lug (8) on both sides |
|
|
| 5 |
Remove cover behind rear seat (7) |
|
|
| 6 |
Remove spreading clips (3) from bottom rear center section paneling (2) |
|
|
| 7 |
Remove bottom rear center section paneling (2) |
|
|
| 8 |
Unclip clips (4) from left paneling (5) |
|
|
| 9 |
Disconnect trunk lamp connector |
|
|
| 10 |
Remove left paneling (5) |
|
|
| 11 |
Unclip clips (4) from right paneling (6) |
|
|
| 12 |
Remove right paneling (6) |
|
|
| 13 |
Install in the reverse order |
|
|