Remove/install water repellent - AR88.85-P-2100P

MODEL 203.0 

MODEL 203.7 except CODE (413) Panoramic sliding roof 

Fig 1: Identifying Water Repellent Remove/Install Components - Model 203.7 Except Code (413) Panoramic Sliding Roof

	Removing
1	Remove water repellent (1)	First from clip (2) on A-pillar, then from clip (3) in roof area.
2	Remove clip (3)	Mark position of clip (3).
	Install
3	Install new clip (3) on roof gutter	Tension clip (3) with pliers.
4	Install water repellent (1)	Install on rear window (5).
		Long wedge	Figure

Fig 2: Identifying Long Wedge (115 589 03 59 00)