Crank engine with starter. - AR01.10-P-0110PV

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 111.951 in MODEL 203.035 /235 /735

ENGINE 111.955 in MODEL 203.045 /245 /745

ENGINE 112.912 in MODELS 203.061 /261, 209.361 /461

ENGINE 112.955 in MODELS 209.365 /465

ENGINE 112.961 in MODELS 203.065 /265

ENGINE 113.968 in MODEL 209.375 /475

ENGINE 271.940 in MODELS 203.042 /242 /742, 209.342 /442

ENGINE 271.946 in MODELS 203.046 /246 /746

ENGINE 271.948 in MODELS 203.040 /740

ENGINE 112.946 in MODELS 203.064 /264

ENGINE 113.987 in MODELS 209.376 /476

ENGINE 112.916 in MODELS 203.081 /281

ENGINE 112.953 in MODELS 203.084 /284

ENGINE 113.988 in MODEL 203.076 /276

ENGINE 113.989 in MODEL 171.473

ENGINE 271.921 in MODEL 203.730

ENGINE 156.982 in MODEL 209.377 /477

ENGINE 271.955 in MODEL 209.341 /441

Fig 1: Cranking Engine With Starter - Engines 112.912, 112.961, 271.948, 112.946, 112.916, 112.953 & 113.988

	Remove/install
	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
1	Switch off ignition	Ignition key (1) in steering wheel (A) must be in position "0".
2	Open engine hood	Model 203	AR88.40-P-1000P
		Model 209	AR88.40-P-1000Q
		Model 171.4	AR88.40-P-1000V
3	Connect compression recorder (2)		AR01.10-P-0010-01PR
		Electrical connection set	Figure
		Compression recorder	Figure
4	Crank engine	Also actuate contact switch (3) on compression recorder (2).
5	Install in the reverse order
6	Read out fault memory and erase	When the work is complete stored faults must be worked on in the diagnostic trouble code memories and erased.
		The stored faults can be caused by removed cables, assembly operations, test operations as well as by a simulation.
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A

Fig 2: Identifying Electrical Connection Kit (220 589 00 99 00)

Fig 3: Identifying Compression Recorder (001 589 76 21 00)

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnosis system, Compact Passenger Car	6511 1801 00