LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> SLK350 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Exhaust System -- 203 Chassis) >> Testing & Repair >> Replace the rivet nuts in the exhaust manifold. - AR49.10-P-5531-01DA

Replace the rivet nuts in the exhaust manifold. - AR49.10-P-5531-01DA

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cocking Bolt (103 589 01 39 00)
G04607646
  1. Hammer rivet nuts with a suitable bolt (arrow) out of exhaust manifold bores.

    IMPORTANT Only screw bolt into rivet nut by hand.

    Fig 2: Locating Bolt For Hammering Out Rivet Nuts
    G04607647
  2. Insert new rivet bushes into exhaust manifold bore.
  3. SPECIAL TOOL Screw cocking bolt into rivet nut and tighten.
  4. SPECIAL TOOL Unscrew cocking bolt.
Fig 3: Identifying Cocking Bolt
G04607648
scientia non olet · About LEMON Manuals