Remove/install cradle for handy (telephone) - AR82.70-P-8918V
MODELS 171.4 with CODE (359) TELE AID emergency call system, low-cost with CODE (386) Preinstallation for "portable CTEL" UPCI telephone system with CODE (387) preinstallation for "portable CTEL" UHI system USA/Canada with CODE (388) "Portable CTEL" UPCI telephone system with CODE (498) Japan version
| Removal/installation | ||
|---|---|---|
| 1 | Open the stowage box of the center console (1) | |
| 2 | Unscrew bolts (2) | |
| 3 | Unclip cover (3) | |
| 4 | Separate electrical connectors (4) | |
| 5 | Close the stowage box of the center console (1) and open the cover on the telephone compartment (5) by pressing the left-hand release button (6) | |
| 6 | Take off cover (8) | |
| 7 | Remove the storage tray (7) | |
| 8 | Route the wiring harness of the UPCI (Universal Portable CTEL Interface) holder (A34/15) through the opening (arrow) | |
| 9 | Use a suitable screwdriver to unclip the UPCI (Universal Portable CTEL Interface) holder (A34/15) from the storage tray (7) | |
| 10 | Install in the reverse order | |
| 11 | Perform a function test |