Remove/install brake pedal - AR29.10-P-4597V

MODELS 171.4 with TRANSMISSION 716.6, 722.9 

Fig 1: Identifying Brake Pedal Components - Shown On Model 171 With Transmission 716

Courtesy of MERCEDES-BENZ USA

Shown on model 171 with transmission 716 

	Remove/Install
1	Remove left cover below instrument panel		AR68.10-P-1500V
2	Remove front cover (1) of pedal assembly (2)		AR29.10-P-0320V
3	Remove foot controls (2).	Vehicles with transmission 716	AR29.10-P-0300V
		Vehicles with transmission 722	AR29.10-P-0300VA
4	Remove rear cover (3) of the pedal assembly (2)		AR29.10-P-0320V
5	Unhook retracting spring (4a) from brake pedal (4)
6	Lever the safety bolt (5a) out of the pedal shaft (5)
7	Lever out pedal shaft (5)	Installation:  Grease pedal shaft (5) lightly.
		Long-life grease	*BR00.45-Z-1001-06A
8	Remove brake pedal (4)
	Check
9	Check bushings (4b, 4c)	Check bushings (4b, 4c) for wear and replace if necessary Installation:  Grease bushings (4b, 4c) lightly on the inside diameter.
		Long-life grease	*BR00.45-Z-1001-06A
10	Check pedal rubber (6) for wear.	Replace pedal rubber (6) if necessary.
11	Install in the reverse order