Active service system (ASSYST PLUS), operating instructions - GF00.20-P-0004-01SK
General
The active service system PLUS (ASSYST PLUS) can be used to display information of the instrument cluster (A1) in the upper multifunction display (A1p13).
The following information can be displayed:
- Service interval indicator
- Remaining distance
- Remaining time
- Fault and warning message on engine oil
- Oil level measurement messages initiated by driver
- Display of main inspection or emission inspection dates
- Service memory full
The active service system Plus (ASSYST PLUS) is operated using the reset button (1) on the instrument cluster (A1), which is on the left side of the instrument cluster (A1), and the scroll forward/back button (S110s1) and the system selection button (S110s3) on the multifunction steering wheel (MFL).
The warning indicators have differently colored backgrounds:
- White = priority 3
- Red = priority 2
- Red = Priority 1 (cannot be acknowledged)
The messages in the upper multifunction display (A1p13) are divided into 3 categories according to their priorities.
Messages in categories 2 and 3 can be acknowledged by the driver using the reset button (1). Messages of category 1 (highest priority) cannot be acknowledged.