Remove/install front seat backrest seat-back lining - AR91.10-P-1910V
MODEL 171.4
MODIFICATION NOTES
| 5.8.04 | Seat-back lining attachment changed, additional latching hooks in lower area | Steps 8 to 12 |
| Remove/install | |||
|---|---|---|---|
| Risk of injury caused by backrest suddenly folding forward if release lever is accidentally operated during inspection and repair work | When working on the seat, be careful not to accidentally release the backrest mechanism allowing the seat to fold forward. Keep body parts clear of the backrest travel area. | AS91.00-Z-0005-01V | |
| 1 | Open Vario roof completely | ||
| 2 | Raise head restraint (2) of left or right seat as far as possible | ||
| 3 | Pull out boot (3) towards the front and release from left and right head restraint guides (4) | ||
| 4 | Unscrew bolts (5) on left and right | ||
| 5 | Set left or right front seat up and to the front | ||
| 6 | Tilt the backrest (6) forward | ||
| 7 | Remove bolts (7) | ||
| 8 | Tilt the backrest (6) backwards | ||
| 9 | Push upholstery (9) on left and right of backrest frame (8) to the side a little and unclip the latching hooks (10) with a mounting wedge | Figure | |
| 10 | Tilt the backrest (6) forward | ||
| 11 | Remove seat-back lining (1) downward from backrest frame (8) | ||
Paint damage in the visible area of the backrest frame (8) cannot be touched up. If necessary, the backrest frame (8) will have to be replaced. See: ↓ |
*BR00.45-Z-1012-07A | ||
| Remove/install front seat backrest frame (8) |
AR91.10-P-3331VA | ||
| 12 | Install in the reverse order |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1012-07A | Touch-up pencil | A 000 986 27 50 |