| |
"Online Software Calibration Number" (SCN) coding |
|
|
| 1 |
Connect diagnostic system and start "Xentry Diagnostics" (XD) |
During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle's on-board electrical system. Otherwise any undervoltage may damage the control units. |
|
| 2.1 |
Perform online SCN coding |
With networked "Star Diagnosis" diagnostic system. |
AR54.21-P-0013-01X |
| 2.2 |
Carry out offline SCN coding |
With non-networked "Star Diagnosis" diagnostic system. |
AR54.21-P-0013-04X |
| 3 |
Read out and erase fault memory |
|
|