Measuring rear axle carrier (when removed) - AR40.30-P-0410P
MODEL 171, 203
| Remove/Install | |||
| 1 | Remove front rubber mounts in rear axle mount | - |
- |
| Fig 5 | |||
| Model 171 | AR35.10-P-0040 | ||
| Fig 6 | |||
| Fig 7 | |||
| 2 | Remove rubber mounts of rear rear axle suspension | - | - |
| - | - | ||
| Model 171 | AR35.10-P-0040 | ||
| Fig 6 | |||
| Fig 2 | |||
| Fig 2 | |||
| Measure | |||
| 3 | Set up Celette straightening bench modular members | ||
| 4 | Insert mounts (048a, 048b) in the mounts of the Celette straightening bench | Fig 2 | |
| 5 | Place rear axle carrier complete (with axle halves) or as separate part on the mounts (048a, 048b) | BE40.30-P-1002-07B | |
| 6 | Measure dimensions (L1, L2, L3) | BE40.30-P-1002-07B | |
| Fig 3 | |||
| Fig 4 | |||
| 7 | Install in the reverse order |
TEST VALUES FOR REAR AXLE CARRIER, TENSION ARM, CAMBER STRUT/TORQUE STRUT
| Number | Designation | Model 171 | ||
|---|---|---|---|---|
| BE40.30-P-1001-07B | Dimension | Camber strut "L1" | mm | 742 (±2) |
| Tension arm "L2" | mm | 873 (±2) | ||
| Torque strut "L3" | mm | 1034 (±2 | ||
| BE40.30-P-1002-07B | Distance between rear axle carrier casing and checking fixture | mm | ≤ 5 | |