Check caster, compare with figure in table - AR40.20-P-0322-03V
CASTER TEST AND ADJUSTMENT SPECIFICATIONS
| Number | Designation | Model 171 | |
|---|---|---|---|
| BE40.20-P-1001-20A | Approved maximum variation in caster angle on left and right sides of vehicle | ∠° | 30' |
Caster angle tolerance range: ± 30'
The ride-height readings are displayed by the electronic clinometer in decimal degrees [°].
Procedure:
- Measure heights of front and rear axles, then consult the table for the caster data.
Example: Front ride height 2.7°
+ rear ride height 1.7°
= Caster 10.41°
Front axle at front ride height
Rear axle suspension at rear ride height