LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> SLK280 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Paintwork -- 203 Chassis) >> Maintenance >> Use of fine polishing paste - AP98.00-P-0638A

Use of fine polishing paste - AP98.00-P-0638A

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 124, 126, 129, 140, 163, 168, 170, 201, 202, 203, 208, 209, 210, 211, 215, 220, 230, 240 

MODEL 461.302 /332 /342 /345 

MODEL 463 

    Application   
1 Wash the vehicle IMPORTANT Then dry the vehicle.  
2 Remove any other contamination such as, e.g. tar splashes and industrial deposits NOTES Do not work in the sun, since this can cause serious paint damage. AP98.00-P-0635A 
3 Buff out damage locally with a lambskin wheel and fine polishing paste NOTES Guide the polishing machine (buffer) with light pressure and do not tilt over otherwise so called "buffer swirl" occurs: ↓  
REFER TO TESTING & REPAIR   Buffing marks from polishing painted surfaces
IMPORTANT The speed of the lambskin disk should be between 1500 rpm and 2000 rpm (otherwise inadequate polishing effect).
IMPORTANT Use cork or rubber backing discs. Take care not to rub through the top coat film. Depending on the damage type, roughen or grind the affected area beforehand with wet abrasive paper (P2000).		 AR98.00-P-0750-17A 
    Polish *BR00.45-Z-1015-04A 
4 Buff up any visible polishing marks and the entire surface of the part IMPORTANT Using the Moltoprene disc without polishing agent. Buff until the luster of the adjacent surface is reached.  
5 Rub off polish residues IMPORTANT After drying, buff up with a polishing wad moistened with water.  
6 Buff up the surface manually with polish and a polishing wad IMPORTANT In order to make polishing work easier, use clean polishing wads or clean polishing cloth while changing them frequently. *BR00.45-Z-1013-04A   
7 Rub off polish residues IMPORTANT After the drying process, a light film is formed on the treated surface. Using a clean polishing wad moistened in water, rub until the surface is clear.  
8 Treat the surface with gloss preserver IMPORTANT Gloss preservation protects the paintwork against premature matting. *BR00.45-Z-1014-04A 
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1013-04A Polish A 000 986 45 74
BR00.45-Z-1014-04A Gloss preserver A 000 986 44 74
BR00.45-Z-1015-04A Polish A 000 986 43 74
scientia non olet · About LEMON Manuals