Remove/install ornamental frame - AR67.10-P-1200V

MODEL 171 

Shown on model 170 

Fig 1: Identifying Ornamental Frame And Clip

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove paneling from outer A-pillar	Remove paneling from outer A-pillar only on one side	AR88.80-P-8500V
2	Lift molding (1) at side with plastic wedge (arrow) and pull out of clips (2)	Long wedge	Fig 2
	Install
3	Install ornamental frame (1) on clip type fasteners (2), align at side and press on	Use new ornamental frame
4	Install paneling on outer A-pillar		AR88.80-P-8500V

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA