Remove/install cover below instrument panel (left) - AR68.10-P-1500V
MODEL 171.4
Shown on vehicle with code (876) Interior light package
| Remove/install | ||
|---|---|---|
| 1 | Move driver's seat to end position toward rear | |
| 2 | Unscrew bolts (2) and put cover (1) down | (arrows A) below instrument panel in floor covering and on accelerator pedal covers. Clip in hooks (4) and arrest catch hooks (arrow B) in center console. |
| 3 | Disconnect electrical connectors (3) | |
| 4 | Unlock catch hook (5) with suitable screwdriver and remove central gateway control module (N93) from cover (1) | |
| 5 | Remove cover (1) out of the footwell | |
| 6 | Install in the reverse order |