Remove/install longitudinal member paneling - AR88.80-P-6000V

MODEL 171.4 

Fig 1: Identifying Longitudinal Member Paneling Components

Courtesy of MERCEDES-BENZ USA

Illustrated on left side of vehicle 

	Remove/Install
1	Remove left and right door sill molding		AR68.30-P-4100V
2	Unclip longitudinal member paneling (1) in upper area of from longitudinal member with mounting wedge (2)		Figure
3	Remove left and right underbody paneling		AR61.30-P-1001V
4	Unscrew bolts (3) and remove splash guard (4)
5	Unclip longitudinal member paneling (1) from front retaining strip (5) and rear retaining strip (6) with mounting wedge (2)		Figure
6	Unclip longitudinal member paneling (1) on retaining clips (7) from longitudinal member with mounting wedge (2) and remove	Installation:  Replace damaged retaining clips (7)	Figure
7	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA