Rotary tumbler microswitches, location / task / design / function - GF82.20-P-4105SK
MODEL 171.4
| Rotary tumbler microswitches, location | The rotary tumbler/trunk lid microswitch (S88/1) is located in the trunk lid lock. |
| Rotary tumbler microswitch, task | The rotary tumbler/trunk lid microswitch (S88/1) is used to detect the status of the trunk lid as an electrical signal. |
| Rotary tumbler microswitch, design | The trunk lid contact switch (S88/1) is designed as a normally closed contact. This means that when the trunk lid is closed, the switching contact is interrupted. |
| Rotary tumbler microswitches, function | When the trunk lid is opened, the rotary tumbler/trunk lid microswitch (S88/1) sets the corresponding input from the rear SAM control unit with fuse and relay module (N10/2) to circuit 31. |