| 1 |
Fault code |
P200A Right cylinder bank (P0324) |
| |
(Fault code according to OBD) |
P208C Left cylinder bank (P1324) |
| 2 |
Fault storage |
After expiry of test duration and fault |
| |
Activation of the engine diagnosis indicator lamp (EURO3/4) or CHECK ENGINE (MIL)  |
no activation |
| 3 |
Checking frequency |
After each time knock control is switched off |
| 4 |
Checked signal or status |
Knock control hardware test |
| 5 |
Fault setting conditions |
Faults must occur at least 10 times |
| 6 |
Check prerequisites |
- Coolant temperature higher than -15°C
- Load decreases (knock control switched off).
|
| 7 |
 |
If faults occur, the amplifier for the knock-signals in the ME-SFI [ME] control unit is defective. |