Terminating/ending call, function - GF82.70-P-2001R

MODEL 230 with CODE (813) Voice control system (VCS) 

Fig 1: Identifying VCS Switch And Position

Abort 

If the VCS system is switched off by means of the VCS switch (S93/2) during a telephone call, then the voice recognition in the voice control system control unit (A35/11) (VCS) is also deactivated. This is possible at any point of the dialog. If the user is in input mode, the user can cause the voice recognition system to deactivate the VCS by speaking the voice command "End" into the hands-free system microphone (B25).

This is possible at any point of the input mode.

Ending a telephone call 

On vehicles with a multifunction steering wheel, a call is ended via the accept/terminate phone call button (S111s3) and not  by operating the VCS switch (S93/2).