Remove/install center high-mounted stop lamp - AR82.10-P-5375R

MODEL 230.4 except CODE (P99) "AMG Black Series" special model 

Fig 1: Identifying Center High-Mounted Stop Lamp Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove paneling from trunk lid		AR68.30-P-8150R
2	Undo screws (1) and remove side flaps drive gear (2) from trunk lid (4)	Do not disconnect electrical connector from side flaps motor.
			*BA77.30-P-1007-01B
3	Undo nuts (3) and remove bracket (5) out of trunk lid (4)
4	Remove center high-mounted brake lamp (E21) from trunk lid (4)	Until electrical connector (6) is accessible.
5	Disconnect electrical connector (6) and remove center high-mounted brake lamp (E21)
6	Install in the reverse order