Notes regarding the Tele-Aid emergency call system - AH82.95-P-0001-01AM

TELE AID is an emergency call system in which a telephone link to an emergency call center is established automatically after the system is activated.

Improper activation of an emergency call is prohibited and may be the subject of a fine.

If the system is activated inadvertently, always wait for the call from the emergency call center and advise the center that the system is activated inadvertently to ensure that no further rescue measures are initiated.

The system is activated automatically if an airbag has been deployed or if a vehicle rollover has been detected.

The system is operated manually using the SOS pushbutton switch in the overhead control panel.

Please make sure when carrying out repair work on vehicles with TELE AID that the ignition key is removed from the ignition switch.

When carrying out work in the area of the overhead control panel, on wiring harnesses or in the area of the TELE AID for cellular telephone control modules, disconnect the battery.

The TELE AID control module is equipped with an integrated turnover sensor. This control module shall never be turned out of its longitudinal or transversal axis with terminal 15R: ON.

The ignition key must always be withdrawn before carrying out towing or recovery operations on a vehicle fitted with the TELE AID system!