Remove/install batteries for remote control key - AR80.35-P-4210E

MODEL 202 as of 1.6.97, 208, 210 as of 1.3.97, 215, 220, 240 

Fig 1: Identifying Remote Control Key Components - Model 202 As Of 1.6.97, 208, 210 As Of 1.3.97, 215, 220, 240

	Remove/Install
	The spare key cannot be opened, it contains no batteries.
1	Take mechanical key (2) out of remote control key
2	Press in retainer (1) with mechanical key (2)
3	Lift battery compartment (3) slightly in direction of arrow (4)
4	Remove battery compartment (3) in direction of arrow (5)	Installation:  Battery compartment must catch in key housing. Discharged batteries have to be disposed of in an environmentally acceptable manner.
5	Insert batteries (6) below contact spring (7)	Installation:  Observe polarity (plus sign toward top) When inserting the batteries ensure that the battery contacts are free of grease.
6	Install in the reverse order