Retrofitting closing assist - AN80.40-P-0001M

MODEL 220 

Figure shows left front door 

Fig 1: Identifying Retrofitting Closing Assist Components

	Removal, installation
1	Remove door locks (1) from front doors	Installation:  Replace removed door locks with new locks and connect connector (arrows) to door control modules (N69/1, N69/2)
			AR72.10-P-4011M
2	Remove door locks (1) from rear doors	Installation:  Replace removed door locks with new locks and connect connector (arrows) to control modules (N69/3, N69/4)
			AR72.12-P-2510M
3	Install in opposite order
	Checking
4	Adapt control modules for closing assist with STAR diagnosis	Adapt the following control modules: EIS closing assist PSE closing assist
5	Check closing assist for proper function
6	Enter SA CODE 883 in FDOK

PARTS ORDERING NOTES

Part no.	Designation	Quantity
KG 72	Left front door lock	1
KG 72	Right front door lock	1
KG 73	Left rear door lock	1
KG 73	Right rear door lock	1