Function of manual drive mode selection - GF27.60-P-3011GAZ
TRANSMISSION 722.6 in MODEL 215, 220 (except 215.374 /379, 220.074 /174 /179) as of 1.9.02, 240
TRANSMISSION 722.6 in MODEL 230 (except 230.474 /479) as of 1.9.03 except CODE (428a) Steering wheel shift buttons
With the selector lever and the transmission mode switch (S16/5) it is possible to adapt the automatic sequence of the shift to particular operating conditions.
The shift range can in fact be changed in the forward gears while driving, however the electronic transmission control (ETC) prevents a shift at an unacceptably high engine speed.
In position "C" (comfort program) of the transmission mode switch (S16/5) a lower overall ratio and therefore a lower output torque is available when driving backwards and forwards. This allows the vehicle to move off more gently. In addition, the gears are not driven to maximum revs.
| Location/task/design/function of floor shift | GF27.60-P-5100GA | ||
| Location/task/design/function of shift detent | GF27.60-P-5101GA | ||
| R/P lock, location/task | GF27.60-P-5121GA | ||
| Location/task/function of position indicator | Model 215, 220 | GF27.19-P-5129PZ | |
| Model 230 | GF27.19-P-5129RZ | ||
| Model 240 | GF27.19-P-5129X | ||
| ETC control unit, location/task | GF27.19-P-4012G | ||
| Electronic selector lever module control unit, location/task | GF27.19-P-5140GA |