Automatic transmission (AT), selector lever positions - GF27.10-P-0001-05GA

Transmission 722.6 up to 19.08.01 in models 215, 220 

The selector lever can be moved into 6 different positions.

The selector lever positions have the following meanings: 

P  Park pawl and starting position

R  Reverse gear

N  Neutral and start position

(No power is transmitted. The vehicle is not in gear.)

D  All five forward gears are available.

+  touch: Upshift by one shift range at a time.

Press and hold: Change from the current shift range direct to "D"

• Touch: Shift down one shift range.

  The selected gear is only actuated at the permitted speed.

  Press and hold: Change the shift range to the currently engaged gear (shift range display in instrument cluster (A1)).

  Fig 1: Identifying Selector Lever Positions (Winter Program)

  

Transmission mode switch (S16/5): 

S  Standard program

• Driving in 1st gear for all driving situations

W  Winter mode

• Starting off always in 2nd gear (except in 1st gear shift range).
• The gears are not completely disengaged.