Remove/install alternator belt pulley - AR15.40-P-5710I
ENGINE 112.922 in MODEL 220.063
ENGINE 112.944 in MODEL 220.065
ENGINE 113.941 in MODEL 220.070
ENGINE 113.960 in MODELS 215.375, 220.075
ENGINE 113.963 in MODEL 230.475
ENGINE 137.970 in MODELS 215.378, 220.178
ENGINE 112.972 in MODELS 220.067 /167
ENGINE 112.973 in MODEL 230.467
ENGINE 112.975 in MODELS 220.087 /187
ENGINE 113.948 in MODELS 220.083 /183
ENGINE 113.966 in MODELS 220.084 /184
ENGINE 113.986 in MODELS 215.373, 220.073 /173
| Remove/install | |||
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | AS00.00-Z-0011-01A | |
| 1 | Open engine hood and raise to vertical position | Model 215, 220 | AR88.40-P-1000M |
| Model 230 | AR88.40-P-1000R | ||
| Risk of explosion caused by oxyhydrogen gas. Risk of poisoning and caustic burns caused by swallowing battery acid. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and safety glasses. Only pour battery acid into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| Notes on battery | All models | AH54.10-P-0001-01A | |
| 2 | Remove alternator | Engines 112, 113 in models 215, 220 | AR15.40-P-5032I |
| Engine 137 in models 215, 220 | AR15.40-P-5032N | ||
| 3 | Unscrew collar nut (1) | ||
| Double hexagon wrench to remove pulley | WF58.50-P-1540-01I | ||
| *BA15.40-P-1004-01A | |||
| Fig 3 | |||
| 4 | Remove ribbed V-belt pulley (3) | 100 000 km, simultaneously also replace the poly-V-belt pulley (3). |
|
| 5 | Install in the reverse order |
| Number | Designation | Engines 112.91/92/94/ 953/954/955/ 96/97, 113.94/96/98 | Engine 137 | |
|---|---|---|---|---|
| BA15.40-P-1004-01A | Collar nut on poly-V-belt pulley | Nm | 80 | 80 |