LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> S55 >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Brakes -- Testing & Repair -- 215 & 220 Chassis >> Testing & Repair >> Checking brake booster hydraulic unit - AR42.50-P-0001MB >> Detach pressure gauge caused by swallowing brake fluid. caused by brake fluid coming into contact with skin and eyes. - AR42.50-P-0001-02MB

Detach pressure gauge caused by swallowing brake fluid. caused by brake fluid coming into contact with skin and eyes. - AR42.50-P-0001-02MB

DANGER Risk of poisoning  caused by swallowing brake fluid. Risk of injury  caused by brake fluid coming into contact with skin and eyes Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1012-15A Pressure tester (hydraulic single / dual circuit brake systems)
WH58.30-Z-1003-23A Distributor A 116 990 02 72
  1. Switch off ignition.
  2. Release pressure from booster circuit (by depressing brake pedal approximately 30 times).
  3. Disconnect test line (6) from pressure gauge to adapter (5).
  4. Remove adapter (4) and distribution module (5).
  5. Install angled fitting (3) on hydraulic line.
  6. Install nuts (1) on the hydraulic line (2).
    Fig 1: Identifying Pressure Gauge Connection Components
    G04849532