Remove/install inner door panel - AR72.10-P-0104MB
MODEL 220.1 /8 with CODE (Z07) Top protection
| Remove/install | |||
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100°C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| Notes on performing repair, body work and welding on vehicles with airbags and ETR units | AH91.00-P-0002-01M | ||
| Legal requirements for handling and storing airbags and emergency tensioning retractors | AH91.00-P-0004-01A | ||
| 1 | Remove front door lining | AR72.10-P-1000MB | |
| 2 | Withdraw ignition key | ||
| 3 | Disconnect plug (4) from driver sidebag squib (R12/9) or front passenger sidebag squib (R12/10) on sidebag unit | ||
| 4 | Detach electric and pneumatic lines from inner door panel (1) | ||
| 5 | Unscrew bolts at circumference of inner door panel (1) | ||
| 6 | Remove inner door panel (1) while guiding operating cable (2) and release linkage (3). | ||
| Sealing strip | *BR00.45-Z-1036-01A | ||
| 7 | Install in the reverse order |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1036-01A | Sealing strip | A 140 989 00 98 |