Remove/install rear door triangular window - AR72.12-P-1940MB
MODEL 220.1 /8 with CODE (Z07) Top protection
| Remove | |||
| Risk of injury caused by hands or feet being jammed or crushed when working on windshield or windows | Secure windows against dropping, use only specified lifting tools, wear protective shoes. | AS67.00-Z-0003-01A | |
| Notes on avoiding damage to windows installed in special high-security vehicles | AH67.00-P-0003-01FB | ||
| 1 | Open window | ||
| 2 | Remove door lining from rear door | AR72.12-P-1010MB | |
| 3 | Remove rear door inner door panel | AR72.12-P-0104MB | |
| 4 | Remove window guide rail from rear door | AR72.12-P-1500MB | |
| 5 | Remove outer sealing rail | AR72.10-P-1700E | |
| 6 | Pull triangular window (1) with seal (2) out of door frame in direction of B-pillar | ||
| Figure | |||
| 7 | Remove seal (2) from triangular window (1) | ||
| 8 | Remove remaining sealing compound from triangular window (1) and door frame | ||
| Install | |||
| 9 | Fit new seal (2) on triangular window (1) | ||
| 10 | Seal door frame in installation area of triangular window (1) with sealing compound (arrows). | ||
| Adhesive tape | *BR00.45-Z-1014-01A | ||
| 11 | Install triangular window (1) with seal (2) into door frame | ||
| Figure | |||
| 12 | Install window guide rail for rear door | AR72.12-P-1500MB | |
| 13 | Install rear door inner panel | AR72.12-P-0104MB | |
| 14 | Install door lining on rear door | AR72.12-P-1010MB | |
| 15 | Install outer sealing rail | AR72.10-P-1700E | |
| 16 | seal all the way around to triangular window (1), door frame and window guide (arrows). | ||
| Sealing adhesive | *BR00.45-Z-1005-02A |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1014-01A | Adhesive tape | A 000 989 98 85 |
| BR00.45-Z-1005-02A | Sealing adhesive | A 004 989 53 71 |