Rear door roller sun blind does not roll all the way up - AF77.20-P-6006A

MODEL 220 up to 28.3.03 

OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES

Category	Op. no.	Operation text	Time	Acc. no.	Code
P	726380	Remove and install side window roller blind in rear door, replace according to condition (door panel removed)	003 WU/0.3 h	-	-

Damage code	Cause	Remedy
81 050	No tension on blind springs.	1 Remove door lining.	AR72.12-P-1010M
		2 Unscrew screws (1) for roller blind and remove roller blind fro door panel.
		3 Unscrew front side screw plugs (2) for roller blind. Hold cover so that it does not twist.
		4 Carefully lift cover approx. 5 mm and turn four times clockwise around its own axis to tension the spring. Do not lift cover more than 5 mm, because otherwise the spring would be completely released
		5 Install in reverse sequence.

Fig 1: Identifying Bolts & Screw Plugs Of Rear Door Roller Sun Blind