Removing and installing center air nozzle - AR68.10-P-1150N

MODEL 215 

Fig 1: Identifying Center Air Nozzle Remove/Install Components - Model 215

	Removal, installation
1	Unclip upper decorative grille (1) from cover (2) in direction of arrow	Installation  : Ensure that clips (1a), pins (1b) and catch lugs (1c) are inserted correctly in the corresponding points in the cover (2).	Figure
2	Unscrew screws (3)
3	Press catch lugs (6) up with suitable tool and pull out center air nozzle (5) with cover (2)
4	Disconnect connector for lighting	Lighting cannot be replaced or repaired.
5	Install in the reverse sequence

Fig 2: Identifying Long Wedge (115 589 03 59 00)